Maintenance schedules › Bajaj Pulsar NS200

Bajaj Pulsar NS200 maintenance schedule

Covers: BS VI Pulsar NS200 sold in India, from Bajaj's owner's manual. Last checked: 16 November 2026.

Bajaj's manual for the Pulsar NS200 has three free services, at 500 to 750 km, 4,500 to 5,000 km and 9,500 to 10,000 km. After that comes a paid service every 5,000 km or 120 days, whichever is earlier. Engine oil is replaced every 10,000 km, with a top-up every 5,000 km.

Always check your owner's manual. This page sums up the manufacturer's published schedule in our own words. Your vehicle's year, engine, country and the way you drive can all change the intervals.

Service intervals

ServiceDistance (km)Time
Free services500 to 750 km, 4,500 to 5,000 km, 9,500 to 10,000 km≈ 300 to 450 mi, 2,800 to 3,100 mi, 5,900 to 6,200 mi30 to 45 days, 240 days, 360 days
Paid serviceCounted from the last service, whichever comes first.Every 5,000 km≈ 3,100 miEvery 120 days
Engine oilBajaj recommends DTS-i 20W50 BS6 or 10W50 synthetic.Replace every 10,000 km, top up every 5,000 km≈ 6,200 mi, ≈ 3,100 mi
Oil filterAt the first service, then every 10,000 km≈ 6,200 mi
Air cleaner element (the chart calls it the viscous filter)Every 20,000 km≈ 12,400 mi
Fuel filter (in-line)Every 15,000 km≈ 9,300 mi
Spark plugEvery 30,000 km≈ 18,600 mi
Coolant and hosesWhichever comes first.Every 30,000 km≈ 18,600 miEvery 3 years
Brake fluid (DOT 4) and master cylinder and caliper sealsBajaj also has you check and top up the level at each service.Replace every 30,000 km≈ 18,600 mi
Front fork oil and sealsEvery 30,000 km≈ 18,600 mi
Chain: clean, lubricate and adjustThe manual says to use chain lube spray every 500 km.At every service

Whichever comes first, distance or time. Metric figures are rounded conversions, not the manufacturer's own.

Heavy use and tough conditions

Service by days as well as distance

Bajaj sets the paid service at 5,000 km or 120 days, whichever is earlier. A bike that does short, low-mileage trips will reach the 120 days first.

Chain care

Bajaj says to lubricate the chain with chain lube spray every 500 km, which is far more often than the service.

Regional differences

This is Bajaj's manual for the BS VI NS200 in India. Bajaj's manuals for other countries and older models are separate, and the intervals may differ. Check the one for your bike.

This page leaves out valve tappet clearance, because we could not read its interval reliably from the manual's chart. The chart marks the oil at some visits differently from the manual's own 10,000 km line, and we have followed that line. It also does not cover older BS IV bikes or other countries. The mile figures are our rounded conversions, not Bajaj's.

How to track this in Loggy

Loggy is a free maintenance logbook app for iOS and Android. Add your NS200, log each service with the odometer reading and the receipt, and set a date reminder for 120 days after it. The days limit is easy to miss on a bike that does few kilometres.

The free plan has unlimited vehicles, reminders, PDF export and vehicle transfer, and no ads.

Download on the App StoreGet it on Google Play

Frequently asked questions

How often should a Pulsar NS200 be serviced?

Bajaj's manual has three free services, then a service every 5,000 km or 120 days, whichever is earlier.

How often is the Pulsar NS200 engine oil replaced?

Every 10,000 km, with a top-up every 5,000 km, according to Bajaj's manual.

When does the NS200 air filter need replacing?

Every 20,000 km, according to Bajaj's manual.

When are NS200 spark plugs replaced?

Every 30,000 km, according to Bajaj's manual.

How often is the NS200 brake fluid replaced?

Bajaj has it replaced every 30,000 km, along with the master cylinder and caliper seals.

How-to guides

Terms and tools

Other maintenance schedules

Sources

Other official guides for this model (not summarised on this page):